Main technical parameters:

Parameters and characteristics	description
Rated operating current	6A~100A
Number of poles	1P+N/3P+N
Rated insulation voltage UI	500V
Depth of connection (effective contact surface)	15mm
Rated Operating Voltage (Uc)	AC220/AC380V
Withstand voltage	2,000VAC for 1 min
Action process	Remote control, can be long-distance opening and closing.
Rated to withstand impulse voltage Uimp	6kV
Insulation resistance	The insulation resistance is not less than 5MΩ
Mechanical life	10000 times, 3 times/min
Electrical life	6000 times
Breaking capacity	6KA
Overload protection	Electronic (non-double gold)
Overvoltage and undervoltage alarm and threshold protection	Over-voltage protection range value: 255V~380V, under-voltage protection range value: 100V~180V, action time≤1S, over-voltage recovery value: 250±5V, under-voltage recovery value: 190±5V, all alarm values and opening thresholds can be set
Self-retest over-voltage protection	The self-relieving over-voltage and under-voltage protection can be turned on or off by command
Leakage alarm and threshold protection	30mA~300mA adjustable, action less than 100ms
Overload alarm and threshold protection	Soft adjustment of overload protection can be achieved by modifying the rated current value by command
Over-temperature alarm and threshold protection	Protection range value: -40°C~120°C, detection accuracy meets ±10°C
power consumption	Not more than 2W
Metrological accuracy	Grade A or greater
Ingress protection	IP20
Pollution level	Level 2
Operating ambient temperature	-25℃～+60℃
Store ambient air temperature	-40℃～+70℃
Relative humidity of the air	≤90%（55℃）
Installation:	It is installed with TH35mm standard mounting rails
Manual/automatic operation	By turning [Manual/Auto] to automatic mode, you can control it remotely.
Manual/automatic operation	If you dial [Manual/Auto] to manual mode, you can manually open or close, and will not close automatically
Security padlocks	When the opening state can be padlocked, the lock diameter is Φ4mm, and the product will not be closed after padlocking.
Power indicator	Solid green: Normal operation in automatic stateFlashing green indicator: Normal operation in manual mode
	Solid red indicator: Flashing red for device overvoltage and undervoltage alarm: Solid orange for device leakage alarm: Flashing orange for device overtemperature alarm: Alarm for device overload
	Indicator light off: No power