100%
| Wiring | 3P/3P+N/4P three-phase | |
| 1P/1P+N/2P single phase | ||
| Rated operating voltage Un | 3P/3P+N/4P 400V AC / 50Hz | |
| 1P/1P+N/2P 230V AC / 50Hz | ||
| Rated current In | FAR6-W125H：125A 100A 80AFAR6-W125：125AFAR6-W100：100A 80A 63A 50A 40A 32A 25A 20A | |
| Control loop supply voltage | 230VAC/ 50Hz | |
| Power-on delay te | 7s≤te≤8s | |
| Auto-close time tc | ≤3s | |
| Automatic opening time TD | ≤2s | |
| Mechanical life | 10000 times | |
| Electrical life | 6000 times | |
| Overload and short-circuit protection | Type C (5In<I≤10In) | |
| Circuit breaker breaking capacity (ICN) | W100/W125:6KA ; W125H:10KA | |
| Dielectric strength | 2500VAC for 1 min | |
| Impact Withstand Voltage (UIMP) | 6KV | |
| Ingress protection | IP20 | |
| Operating temperature | -25°C~65°C(Limit -40°C~70°C) | |
| Relative humidity of the air | ≤95% | |
| Basic action process | In the automatic state, the fee control signal is detected to be 220V, and the drive switch is closed. The fee control signal 0V is detected, and the switch is opened. (For other details, please refer to the status control table) | |
| Manual/automatic operation | If you turn [Manual/Auto] to automatic mode, the payment will be resumed after the arrears are opened, and the payment will be automatically closed, and it will not be automatically closed after other faults are tripped. | |
| If you dial [Manual/Auto] to manual mode, the payment will be resumed after the arrears are opened, and the payment will not be automatically closed, and the payment will not be automatically closed after other faults are tripped. | ||
| Light | The indicator light is on, indicating that there is no arrears. If the indicator is off, the bill is in arrears or there is no power supply. |
 |
FAR6-W energy meter external circuit breaker | 2024-09-24 |
Preview
|
Download the file
|
